Administrator’s Guide for W60P DECT IP Phones440Capturing the Packets via Web User InterfaceFor Yealink DECT IP phones, you can export the packets file to the local system and analyze it.To capture packets via web user interface:1. Click on Settings->Configuration.2. Click Start in the Pcap Feature field to start capturing signal traffic.3. Reproduce the issue to get stack traces.4. Click Stop in the Pcap Feature field to stop capturing.5. Click Export to open the file download window, and then save the file to your localsystem.Capturing the Packets Using the Ethernet SoftwareReceiving data packets from the HUBConnect the Internet port of the DECT IP phone and the PC to the same HUB, and then useSniffer, Ethereal or Wireshark software to capture the signal traffic.Enabling Watch Dog FeatureThe DECT IP phone provides a troubleshooting feature called “Watch Dog”, which helps youmonitor the DECT IP phone status and provides the ability to get stack traces from the last timethe DECT IP phone failed. If Watch Dog feature is enabled, the DECT IP phone will automaticallyreboot when it detects a fatal failure. This feature can be configured using the configurationfiles or via web user interface.ProcedureWatch Dog can be configured using the following methods.Central Provisioning(Configuration File)y000000000077.cfgConfigure Watch Dog feature.Parameter:static.watch_dog.enable
