Configuring Basic Features195information on obtaining the dial now template, refer to Obtaining Boot Files/ConfigurationFiles/Resource Files on page 89.When editing a dial now template, learn the following: indicates the start of a template and indicates the end of atemplate. When specifying the desired line(s) for the dial now rule, the valid values are 0 and line ID(0~8). Multiple line IDs are separated by commas. At most 100 rules can be added to the DECT IP phone.The expression syntax in the dial now rule template is the same as that introduced in thesection Dial Plan on page 186.To customize a dial now template:1. Open the template file using an ASCII editor.2. Create dial now rules between and .For example:Where:DialNowRule="" specifies the dial now rule.LineID="" specifies the desired line(s) for this rule. When you leave it blank or enter 0, thisdial now rule will apply to all lines.If you want to change the dial now rule, specify the values within double quotes.3. Save the change and place this file to the provisioning server.4. Specify the access URL of the dial now template.ProcedureSpecify the access URL of the dial now template using the configuration files.Central Provisioning(Configuration File)y000000000077.cfgConfigure the access URL of thedial now template.Parameter:dialplan_dialnow.url
