ZIEHL-ABEGG Icontrol FXDM Series Operating Instructions Manual
Also see for Icontrol FXDM: Operating instructions
                                                                                                | |
Contents
| 
• 2 x relay outputs (“K3” and “K4”) Function programmable, e.g., for: Status signals, alarmindications, external malfunctions at the digital input, level-control threshold, input signal thresh-old, offset threshold (deviation between current and target value), group control.Parameter Factory setting User Setting Z-Modul-B424441323431 A2 GND E3 GND D3 D4 D5 GNDAusgang0...10V(Imax=10mA)+Eingang0...10V (Ri>100k)+max. Kontaktbelastung 5A/250VACAnalog OUT 232Analog IN 3Digital IN 3Digital IN 4Digital IN 5K4K304.04.2007v_moea01k0.VSDProgramming of following functions of mode 2.03 is notpermissible on Z-Modul-B: |6A|, |7A|, |9K|, |10K|A2 Function 1AA2 min. 0.0 VA2 max. 10.0 VA2 Inverting OFFD3 Function OFFD3 Inverting - - - -D4 Function OFFD4 Inverting - - - -D5 Function OFFD5 Inverting - - - -E3 Function OFFE3 Inverting - - - -K3 Function OFFK3 Inverting - - - -K4 Function OFFK4 Inverting - - - -9.10.6 Networking via MODBUSIt is possible to network several devices with each other. The device uses the MODBUS-RTU as theprotocol for the RS-485 interface.Bus AddressBus AddressThe device address (Device-ID) is factory set to the highest available MODBUSaddress: 247Thisaddressis reserved for operation with an external terminal and should not beoccupied with anything else.AddressingAddressingSwitch addressing to “ON” before setting “address”.Reading and writing parametersThe device supports reading and writing processes for MODBUS Holding Registers. The start addressis 0; the number of registers depends on the device. If the allowable start address or number isexceeded, the device answers with an exception code. The description of the register is devicedependent and can be requested from service for the device/version concerned.Operating Instructions Icontrol – model series FXDM ProgrammingL-BAL-E036-GB 1422 Index 008 Part.-No. 00154773-GB62/96 |
Related manuals for ZIEHL-ABEGG Icontrol FXDM
This manual is suitable for:
Icontrol FXDMIcontrol FXDM SeriesIcontrol FXDM12AIcontrol FXDM12AQIcontrol FXDM17AIcontrol FXDM17AQIcontrol FXDM2.6AIcontrol FXDM2.6AQIcontrol FXDM25AIcontrol FXDM25AQIcontrol FXDM32AIcontrol FXDM32AEIcontrol FXDM32AQIcontrol FXDM39AIcontrol FXDM39AEIcontrol FXDM39AQIcontrol FXDM4.2AIcontrol FXDM4.2AQIcontrol FXDM46AIcontrol FXDM46AQIcontrol FXDM5AIcontrol FXDM5AQIcontrol FXDM62AIcontrol FXDM62AQIcontrol FXDM7.5AIcontrol FXDM7.5AQIcontrol FXDM8.5AIcontrol FXDM8.5AQ
manualsdatabase
Your AI-powered manual search engine