Zanussi ZDS 2010S User Manual

Also see for ZDS 2010: User manual User manual User manual

Contents

• The rinse aid helps, during the last rinsingphase, to dry the dishes without streaks andstains.• Combi detergent tablets contain detergent,rinse aid and other added agents. Be surethat these tablets are applicable to the waterhardness in your area. Refer to the instruc-tions on the packaging of the products.• Detergent tablets do not fully dissolve withshort programmes. To prevent detergent resi-dues on the tableware, we recommend thatyou use the tablets with long programmes.Do not use more than the correct quantityof detergent. Refer to the instructions onthe detergent packaging.Loading the basketsRefer to the supplied leaflet with examplesof the load of the baskets.• Only use the appliance to wash items that aredishwasher-safe.• Do not put in the appliance items made ofwood, horn, aluminium, pewter and copper.• Do not put in the appliance items that can ab-sorb water (sponges, household cloths).• Remove remaining food from the items.• To remove easily remaining burned food, soakpots and pans in water before you put themin the appliance.• Put hollow items (cups, glasses and pans)with the opening down.• Make sure that cutlery and dishes do notbond together. Mix spoons with other cutlery.• Make sure that glasses do not touch otherglasses.• Put the small items in the cutlery basket.• Put the light items in the upper basket. Makesure that they do not move.• Make sure that the spray arms can move free-ly before you start a programme.Before starting a programmeMake sure that:• The filters are clean and correctly installed.• The spray arms are not clogged.• The position of the items in the baskets iscorrect.• The programme is applicable for the type ofload and for the degree of soil.• The correct quantity of detergent is used.• There is dishwasher salt and rinse aid (unlessyou use combi detergent tablets).• The cap of the salt container is tight.TroubleshootingThe appliance does not start or it stops duringoperation.Before you contact the Service, refer to the in-formation that follows for a solution to the prob-lem.With some problems, different indicatorsflash continuously or intermittently at thesame time to show an alarm code.Alarm code Problem• The start indicator flashes continuously.• The end indicator flashes 1 time intermittently.The appliance does not fill with water.• The start indicator flashes continuously.• The end indicator flashes 2 times intermittently.The appliance does not drain the water.• The start indicator flashes continuously.• The end indicator flashes 3 times intermittently.The anti-flood device is on.11www.zanussi.com