Zanussi ZDS 2010S User Manual

Also see for ZDS 2010: User manual User manual User manual

Contents

ContentsSafety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11Technical information _ _ _ _ _ _ _ _ _ _ _ _ 12Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ 13Subject to change without notice.Safety instructionsBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible if an incorrectinstallation and use causes injuries and dam-ages. Always keep the instructions with the ap-pliance for future reference.Children and vulnerable people safetyWarning! Risk of suffocation, injury orpermanent disability.• Do not let persons, children included, with re-duced physical sensory, reduced mentalfunctions or lack of experience and knowl-edge use the appliance. They must have su-pervision or instruction for the operation ofthe appliance by a person who is responsiblefor their safety.• Do not let children play with the appliance.• Keep all packaging away from children.• Keep all detergents away from children.• Keep children and pets away from the appli-ance door when it is open.Installation• Remove all the packaging.• Do not install or use a damaged appliance.• Do not install or use the appliance where thetemperature is less than 0 °C.• Obey the installation instruction supplied withthe appliance.Electrical connectionWarning! Risk of fire and electrical shock.• The appliance must be earthed.• Make sure that the electrical information onthe rating plate agrees with the power supply.If not, contact an electrician.• Always use a correctly installed shockproofsocket.• Do not use multi-plug adapters and extensioncables.• Make sure not to cause damage to the mainsplug and to the mains cable. Should the ap-pliance power supply cable need to be re-placed, this must be carried out by our Serv-ice Centre.• Connect the mains plug to the mains socketonly at the end of the installation. Make surethat there is access to the mains plug afterthe installation.• Do not pull the mains cable to disconnect theappliance. Always pull the mains plug.• Do not touch the mains cable or the mainsplug with wet hands.• This appliance complies with the E.E.C. Di-rectives.Water connection• Make sure not to cause damage to the waterhoses.• The appliance is to be connected to the wa-ter mains using the new supplied hose-sets.Old hose sets must not be reused.• Before you connect the appliance to newpipes or pipes not used for a long time, letthe water flow until it is clean.• The first time you use the appliance, makesure that there is no leakage.2 www.zanussi.com