Zanussi ZDS 2010S User Manual

Also see for ZDS 2010: User manual User manual User manual

Contents

1 23Put 1 litre of water inthe salt container (on-ly for the first time).45 6Filling the rinse aid dispenserCaution! Only use rinse aid fordishwashers. Other products can causedamage to the appliance.The rinse aid, during the last rinsing phase,helps to dry the dishes without streaks andstains.1 2-maxM AX1234+ -3 4To adjust the released quantity of rinse aid,turn the selector between position 1 (lowestquantity) and position 4 (highest quantity).Daily use1. Open the water tap.2. Turn the programme knob until the pro-gramme marker is aligned with the pro-gramme you want to set. Make sure that theappliance is in setting mode, refer to “Set-ting and starting a programme”. Set the cor-rect programme for the type of load and thedegree of soil.• If the salt indicator is on, fill the salt con-tainer.• If the rinse aid indicator is on, fill the rinseaid dispenser.3. Load the baskets.4. Add the detergent.5. Start the programme.7www.zanussi.com