To put the appliance in setting mode, press andhold the start button until the start indicatorgoes off .Starting a programme without delay start1. Open the water tap.2. Close the appliance door.3. Turn the programme knob until the pro-gramme marker is aligned with the pro-gramme you want to set. The on/off indica-tor comes on.4. Press the start button, the programmestarts. The start indicator comes on.Starting a programme with delay start1. Set the programme.2. Press the delay button to delay the start ofthe programme of 3 hours. The delay indica-tor comes on.3. Press the start button, the countdown starts.The start indicator comes on.• When the countdown is completed, the pro-gramme starts.Opening the door while the applianceoperatesIf you open the door, the appliance stops. Whenyou close the door, the appliance continuesfrom the point of interruption.Cancelling the delay start while thecountdown operates1. Press and hold the start button until the startindicator and the delay indicator go off.2. Press the start button, the programmestarts. The start indicator comes on.Cancelling the programmePress and hold the start button until the start in-dicator goes off .Make sure that there is detergent in the de-tergent dispenser before you start a newprogramme.At the end of the programmeWhen the programme is completed, the end in-dicator comes on. If you do not deactivate theappliance within 3 minutes, only the on/off indi-cator stays on. This helps to decrease energyconsumption.1. Deactivate the appliance. Turn the pro-gramme knob until the programme marker isaligned with the on/off indicator.2. Close the water tap.Important• Let the dishes become cold before you re-move them from the appliance. Hot dishescan be easily damaged.• First remove the items from the lower basket,then from the upper basket.• There can be water on the sides and on thedoor of the appliance. Stainless steel be-comes cool more quickly than the dishes.Care and cleaningWarning! Before maintenance, deactivatethe appliance and disconnect the mainsplug from the mains socket.Dirty filters and clogged spray arms de-crease the washing results.Make a check regularly and, if necessary, cleanthem.Cleaning the filters1CBA29www.zanussi.com