ProgrammesProgramme 1) Degree of soilType of loadProgramme pha-sesDuration(min)Energy(kWh)Water(l)70º Heavy soilCrockery, cutlery,pots and pansPrewashWash 70 °CRinsesDry65 - 75 1.5 - 1.7 18 - 2065º Normal soilCrockery and cut-leryWash 65 °CRinsesDry100 - 110 1.4 - 1.5 18 - 2065ºA30’ 2)Fresh soilCrockery and cut-leryWash 65 °CRinse30 0.8 850ºECO 3)Normal soilCrockery and cut-leryPrewashWash 50 °CRinsesDry123 0.86 134) All Prewash 11 0.1 51) The water pressure and temperature, the variations of the mains supply, the options and the quantity of dishescan change the programme duration and the consumption values.2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.3) This is the standard programme for test institutes. With this programme you have the most efficient use ofwater and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for testinformation.4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes andbad odours to come out from the appliance.Do not use detergent with this programme.Information for test institutesFor all the necessary information for test performance. send an email to:info.test@dishwasher-production.comWrite down the product number (PNC) that is on the rating plate.Before first use1. Make sure that the set level of the watersoftener agrees with the water hardness inyour area. If not, adjust the water softener.Contact your local water authority to knowthe water hardness in your area.2. Fill the salt container.3. Fill the rinse aid dispenser.4. Open the water tap.5. Processing residues can stay in the appli-ance. Start a programme to remove them.Do not use detergent and do not load thebaskets.5www.zanussi.com