Zanussi ZOP37982XC User Manual

Also see for ZOP37982XC: User manual

Contents

• Ensure that the appliance is switched off before replacing thelamp to avoid the possibility of electric shock.• Do not use a steam cleaner to clean the appliance.• Do not use harsh abrasive cleaners or sharp metal scrapers toclean the glass door since they can scratch the surface, whichmay result in shattering of the glass.• If the mains power supply cable is damaged, it must bereplaced by the manufacturer, its Authorised Service Centre orsimilarly qualified persons to avoid an electrical hazard.• Excessive spillage must be removed before the pyrolyticcleaning. Remove all parts from the oven.• To remove the shelf supports first pull the front of the shelfsupport and then the rear end away from the side walls. Installthe shelf supports in the opposite sequence.• The means for disconnection must be incorporated in the fixedwiring in accordance with the wiring rules.CONDITIONS OF USEThis appliance is intended to be used in householdand similar applications such as:• Farm houses• By clients in serviced apartments, holidayapartments and other residential typeenvironments.SAFETY INSTRUCTIONSINSTALLATIONWARNING! Only a qualified personmust install this appliance.• Remove all the packaging.• Do not install or use a damaged appliance.• Follow the installation instruction supplied withthe appliance.• Always take care when moving the appliance asit is heavy. Always use safety gloves andenclosed footwear.• Do not pull the appliance by the handle.• Keep the minimum distance from the otherappliances and units.• Make sure that the appliance is installed belowand adjacent safe structures.• The sides of the appliance must stay adjacent toappliances or to units with the same height.• The appliance is equipped with an electriccooling system. It must be operated with theelectric power supply.ELECTRICAL CONNECTIONWARNING! Risk of fire and electricshock.• All electrical connections should be made by aqualified electrician.• The appliance must be earthed.• Make sure that the parameters on the ratingplate are compatible with the electrical ratingsof the mains power supply.• Always use a correctly installed shockproofsocket.• Do not use multi-plug adapters and extensioncables.• Make sure not to cause damage to the mainsplug and to the mains cable. Should the mainscable need to be replaced, this must be carriedout by our Authorised Service Centre.• Do not let mains cables touch or come near theappliance door, especially when the door is hot.3