SETTING AND CHANGING THE TIMEAfter the first connection to the mains, wait until thedisplay shows and "12:00". "12" flashes.1. Press or to set the hours.2. Press to confirm and switch to set theminutes.The display shows and the set hour. "00"flashes.3. Press or to set the current minutes.4. Press to confirm or the set time of day willbe saved automatically after 5 seconds.The display shows the new time.To change the time of day press again andagain until the indicator for the time of dayflashes in the display.SETTING THE DURATION1. Set an oven function.2. Press again and again until starts toflash.3. Press or to set the minutes and then thehours. Press to confirm.When the set Duration time ends the signal soundsfor 2 minutes. and time setting flash in thedisplay. The oven turns off automatically.4. Press any button or open the oven door to stopthe signal.5. Turn the knob for the oven functions to the offposition.SETTING THE END1. Set an oven function.2. Press again and again until starts toflash.3. Press or to set the hours and then theminutes. Press to confirm.At the set End time the signal sounds for 2 minutes.and time setting flash in the display. The oventurns off automatically.4. Press any button or open the oven door to stopthe signal.5. Turn the knob for the oven functions to the offposition.SETTING THE TIME DELAY FUNCTION1. Set an oven function.2. Press again and again until starts toflash.3. Press or to set the minutes and then thehours for DURATION time. Press toconfirm.The display shows flashing .4. Press or to set the hours and then theminutes for END time. Press to confirm.Oven turns on automatically later on, works for theset DURATION time and stops at the set END time.At the set END time the signal sounds for 2minutes. and time setting flash in the display.The oven turns off.5. Press any button or open the oven door to stopthe signal.6. Turn the knob for the oven functions to the offposition.SETTING THE MINUTE MINDERMinute minder can be both set when the oven isturned on and off.1. Press again and again until and "00"flash in the display.2. Press or to set the seconds and thanthe minutes.When the time you set is longer than 60minutes, flash in the display.3. Set the hours.4. The MINUTE MINDER starts automatically after5 seconds.After 90% of the set time the signal sounds.5. When the set time ends the signal sounds for 2minutes. "00:00" and flash in the display.Press any button to stop the signal.COUNT UP TIMERTo reset the Count Up Timer, press and holdand . The timer starts to count up again.USING THE ACCESSORIESWARNING! Refer to Safety chapters. INSERTING THE ACCESSORIESWire shelf:9