• Internally the appliance becomes hot when in operation. Do nottouch the heating elements that are in the appliance. Alwaysuse oven gloves to remove or put in accessories or ovenware.• Before maintenance cut the power supply.• Ensure that the appliance is switched off before replacing thelamp to avoid the possibility of electric shock.• Do not use a steam cleaner to clean the appliance.• Do not use harsh abrasive cleaners or sharp metal scrapers toclean the glass door since they can scratch the surface, whichmay result in shattering of the glass.• If the supply cord is damaged, it must be replaced by themanufacturer, its Authorised Service Centre or similarlyqualified persons in order to avoid a hazard.• To remove the shelf supports first pull the front of the shelfsupport and then the rear end away from the side walls. Installthe shelf supports in the opposite sequence.• The means for disconnection must be incorporated in the fixedwiring in accordance with the wiring rules.Safety instructionsInstallationWARNING!Only a qualified person must installthis appliance.• Remove all the packaging.• Do not install or use a damaged appliance.• Obey the installation instruction suppliedwith the appliance.• Always be careful when you move theappliance because it is heavy. Always wearsafety gloves.• Do not pull the appliance by the handle.• Keep the minimum distance from the otherappliances and units.• Make sure that the appliance is installedbelow and adjacent safe structures.• The sides of the appliance must stayadjacent to appliances or to units with thesame height.Electrical connectionWARNING!Risk of fire and electrical shock.• All electrical connections should be made bya qualified electrician.• The appliance must be earthed.• Make sure that the electrical information onthe rating plate agrees with the powersupply. If not, contact an electrician.• Always use a correctly installed shockproofsocket.• Do not use multi-plug adapters andextension cables.• Make sure not to cause damage to themains plug and to the mains cable. Shouldthe mains cable need to be replaced, thismust be carried out by our AuthorisedService Centre.• Do not let mains cables touch or come nearthe appliance door, especially when the dooris hot.• The shock protection of live and insulatedparts must be fastened in such a way that itcannot be removed without tools.• Connect the mains plug to the mains socketonly at the end of the installation. Make surethat there is access to the mains plug afterthe installation.www.zanussi.com 3