Axiolab A Carl ZeissB 40-015 e 06/99 1-5The optical performance of the Axiolab A can be ideally matched to the relevant requirements by usingvarious objectives which are inserted into a 5-position nosepiece (1-1/6).The camera port (1-1/9) attached to the binocular reflected-light tube (1-1/8) is available for thedocumentation of microscope images. Microscope and video accessories are attached via a wide varietyof specific adapter components and modules.Pulling out or pushing in the pushrod on the binocular tube allows you to switch between observationand photomicrography/videomicroscopy. Switchover is 100% in each case, i.e. simultaneous observationand documentation is not possible.The use of specific sliders in the reflected-light illuminator H allows observation in polarization contrast.Epi-fluorescence observation is possible with a special fluorescence configuration.1.3 Microscope Configurations and ModulesDepending on the application, the following configurations of the Axiolab A microscope arerecommended:- Axiolab A for reflected-light brightfield with fixed stage and Epi-objectivesCat. No. 490960-9804-000- Axiolab A for reflected-light brightfield with glide stage and Epi-objectivesCat. No. 490962-9804-000- Axiolab A for reflected-light brightfield and transmitted-light examinations with mechanical stageCat. No. 490961-9804-000
