Axiolab A Carl ZeissB 40-015 e 06/99 3-193.5.1 Attachment of Photomicrography Equipment(1) Attachment of SLR Camera, e.g. CONTAX 167 MT• Screw T2 adapter for the CONTAX bayonet (3-16/3) on the 2.5× connector for T2 (3-16/4)(456005-0000-000).• Attach the camera housing (3-16/2) and thecable release (3-16/1), if required.• Loosen the three hexagonal screws (3-16/6) toremove the dust cover (3-16/8) from thecamera tube (3-16/5) and insert thepremounted unit A in the camera tube.• Align the camera unit in the required positionand tighten the three hexagonal screws (3-16/6).• Pull out pushrod (3-16/7) completely forphotomicrography.• When artificial-light color reversal film is used,the CB 3 conversion filter provides the correctcolor temperature of 3200 K.• For daylight color reversal film, the CB 12conversion filter must be used in addition to theCB 3 conversion filter. If focusing is not to be made via theviewfinder of the camera, thecomponent with the eyepiece reticlemust be screwed in the eyepieces (seesections 1.5 and 2.3.1).Fig. 3-16 Attachment of SLR camera, e.g.CONTAX 167 MT
