Zeiss Axiolab A Operating Manual

Contents

Zeiss Axiolab A Operating Manual Manual pdf 22 page image

Carl Zeiss Axiolab A1-12 06/99 B 40-015 e1.4 Function Elements(see Fig. 1-5, after this table)Item Designation Purpose/description1 Stand Module base of the Axiolab A microscope2 6 V, 30 W reflected-lighthalogen illuminatorReflected-light illuminator with 6 V, 30 W halogen lamp3 Reflected-light illuminator H Carrier element for the binocular tube and the illuminator; also used toaccommodate various technique sliders4 Camera port Enables (after removal of the dust cap) the connection of variousadapters for attachment of photomicrography/videomicroscopyequipment (35 mm cameras, video cameras)5 Binocular tube Binocular viewing tube permanently attached to the reflected-lightilluminator H; can be set to the user's individual interpupillary distance;after removal of the dust caps, dia. 30 mm eyepieces - one of which isadjustable (foc) - can be inserted.6, 7 Eyepiece, right and left Fixed and adjustable (foc) eyepiece; the fixed eyepiece must beassigned to the less myopic eye; two focusing eyepieces are required ifreticles or photo reticles are used.8 Dust protection slider(2 pcs.)These two dust protection sliders should always remain in theAxiolab A microscope; technique sliders can also be inserted only iftransmitted-light equipment is available9 Objective nosepiece Carrier for the maximum of 5 objectives which are swung into thebeam path manually10 Specimen stage, fixed Stage area: 160 × 140 mm; for the maximum specimen height of- 20 mm (stage attached at upper stop) or- 45 mm (stage attached at lower stop)Two spring clips (supplied) enable specimens attached to a 26 × 76 mmslide to be held in position (also see item 31)11 Coaxial coarse and fine drive, L Permits the specimen stage to be lifted and lowered within a travelrange of approx. 20 mm (also see section 1. 6 (7));used for specimen focusing; mechanical unit together with item 2912 Connecting cable for 6 V30 W reflected-light illuminatorMust be connected to the sockets at the instrument rear to allowoperation of the reflected-light illuminator13 ”A/D” illumination converter Permits the switchover between incident light and transmitted-lightwhen instruments with an additional transmitted-light equipment areused.