Start-UpAxiostar plus Attaching epi-fluorescence illuminator Carl ZeissB 40-815 e 12/01 2-232.11.1 Filter stop carrier for epi-fluorescence illuminatorThe epi-fluorescence illuminator has two slots for filter stop carriers. The carriers can be inserted andaccessed from the right or left.Filter stop carrier 1 (designated with one dot) has three positions (a, b, c) for filters with a 25 mmdiameter. O-rings are used to hold the filters in the stop carrier.Filter stop carrier 2 (designated with two dots) also has three positions. Position 1 (adjust) is used toadjust the fluorescent lamp (see section 2.11.4). Position 2 (open) is a free passage, but a 25 mmdiameter filter can be used. Position 3 (closed) is the locking position for the fluorescent lamp.• When inserting the filter stop carrier, make sure that the markings on the top and right side ofthe carrier match the markings and the epi-fluorescence illuminator.1 Filter stop carrier 12 Filter stop carrier 23 Epi-fluorescence illuminatorFig. 2-21 Filter stop carrierArtisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
