OperationAxiostar plus Attaching adapters for digital compact cameras Carl ZeissB 40-815 e 12/01 3-25• Zoom camera lens from wide-angleposition (W) through to tele position (T).• Perform test until image is format-fillingwithout trimming or vignetting.• Tighten the set screw (3-15/3) again.No untrimmed image may be obtained when acamera adapter combination is used which isnot recommended by Carl Zeiss.3.11.2 Digital cameras with 52 mmfilter thread,e.g. SONY DSC–S70, DSC-S75,DSC-S85When delivered, the sliding (3-16/4), thethreaded adapter ring M37/M52 (3-16/3) andthe lens mount (3-16/6) are premounted. Thedrawing on the right shows the disassembledstatus.Furthermore, the threaded ring adapterM37/52 (3-16/3) can be unscrewed from thesliding mount (3-16/4) (not shown), i.e.cameras with M37 can also be attached asdescribed in the previous chapter.• Screw SONY VAD-S70 adapter ring(3-16/2) into the objective/filter thread ofthe DSC-S70 camera (3-16/1) until stop.• Plug connector 60 (3-16/8) onto thebinocular phototube (3-16/9) and tightenthe 3 set screws (3-16/10).• Screw the unit, consisting of sliding mount(3-16/4), the threaded adapter ringM37/M52 (3-16/3) and the lens mount(3-16/6) into the SONY VAD-S70 adapterring (3-16/2).• With the lens mount (3-16/6) pointingforward, plug the unit onto connector 60(3-16/8) until stop and tighten the setscrew (3-16/7).1 SONY DSC-S70 camera2 SONY VAD-S70 adapter ring3 M37/M52 threaded adapter ring4 Sliding mount5 Set screw6 Lens mount7 Set screw8 Connector 60 for microscope camera9 Binocular phototube10 Set screwFig. 3-16 Attaching Sony "Digital Still Camera DSC-S70"Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
