1 GeneralBU 0135 en-4118 231.6.1 UL and CSA approvalFile No. E365221Categorisation of protective devices approved by the UL according to United States Standards for theinverters described in this manual is listed below with essentially the original wording. Thecategorisation of individually relevant fuses or circuit breakers can be found in this manual under theheading “Electrical Data”. All devices include motor overload protection.( section 7.2 "Electrical data")Information Group fuse protectionThe devices can basically be protected as a group via a common fuse (details in the following). The adherence ofthe total currents and the use of the correct cables and cable cross-sections must be taken into account whendoing this. If the device or devices is/are being installed close to the motor, this also applies to the motor cable.UL / CSA conditions according to the reportInformation“Use 60/75°C copper field wiring conductors.”„These products are intended for use in a pollution degree 2 environment““The device has to be mounted according to the manufacturer instructions.”
