red lion SN-66 series Software Manual

Contents

red lion SN-66 series Software Manual Manual pdf 146 page image

Services Tab Revised 2017-08-31Ping Alive Drawing No. LP0997-C- 138 - Sixnet ® Series SN/RAM ® 6000 & RAM 9000 Software ManualContact: Enter the name of the contact person for this managed device. This field is useful in determining whoto contact in the event of an issue. The maximum amount of characters that can be used in this field is 250characters.Allow Serial Number OID: Select YES to allow users and management systems to retrieve the unit serialnumber from the SNMP Agent. If NO is selected, a query of the serial number OID will return “UNKNOWN”.Download MIB: Click on this button to download the MIB file.Click Save to store the settings for the next reboot, or click Apply for the settings to take effect immediately.Selecting Revert, will reset all fields to previously saved defaults.3.5.10 Ping AlivePing is a diagnostic tool used for verifying connectivity between two hosts on a network. It sends ICMP (InternetControl Message Protocol) echo request packets to a remote IP address and watches for ICMP responses.Select the Ping Alive tab menu and the following dialog window appears:Enable Ping Alive: Select YES to enable the Ping Alive Service. The recommended setting for this option isNO. Ping Alive will send the specified number of packets in Test Packets to Send, every interval defined in TestInterval. Should the ping fail to the first host, a second host may also be defined. Host Fail Type will control how