Access Red Lion Web Server Revised 2017-08-31Accessing the Web User Interface Drawing No. LP0997-C- 12 - Sixnet ® Series SN/RAM ® 6000 & RAM 9000 Software ManualAt this point, you are connected to the Red Lion RTU or router and can configure it to meet your needs.If the ppp0 or wwan0 interface do not show an IP address, this could indicate that the internal SIM/Module has notbeen properly activated. Low or invalid signal strength may also contribute to the issue. Please contact yourservice provider to ensure proper activation. You may need to enter provisioning information in theNetworkingCellularProvisioning screen. Consult Section 2.1 for more information.1.4.2 SSH, Telnet, Serial RS‐232 Connections to Red Lion RTUs or RoutersFor alternative connections to the Red Lion RTU or router, please contact Red Lion Technical Support for additionaldocumentation.Note: The SN/RAM 6000 and RAM 9000 series have many modes of operation which can cause the powerconsumption and corresponding heat dissipation to vary greatly. This factor, along with others, canaffect the performance and longevity of the unit. The SN/RAM 6000 series and RAM 9000 series arerated for operation from -40° to 75°C in typical applications where the cellular communication ismoderate. Please see the respective hardware guides for more details.
