Revised 2017-08-31 Advanced TabDrawing No. LP0997-C Out-of-Band ManagementSixnet ® Series SN/RAM ® 6000 & RAM 9000 Software Manual - 237 -3.7.3 Out‐of‐Band ManagementThe Out-of-Band (OOB) Management menu item is used to configure the capability of remotely administrating athird-party device connected via a serial cable on the Red Lion RTU or router.Note: Please refer to the third-party device user manual and/or technical support to determine what type ofconnection is required to connect with the Red Lion RTU or router from the RS-232 serial port.Click on the Out-of-Band Mgt menu item and the following dialog window appears:Click on the Add button to add an instance for OOB Management and the following window appears:Interface: Select the interface to used.Note: For Speed, Bits, Parity and Stop Bits, consult the configuration of the remote device beingattached; this setting must be compatible.Speed: Select the desired interface speed to be used.Bits per Character: Select the word length (bits per character) to be used.Parity: Select the parity to be used. Consult the configuration of the remote device being attached, this settingmust be compatible.
