Revised 2017-08-31 Services TabDrawing No. LP0997-C Serial IPSixnet ® Series SN/RAM ® 6000 & RAM 9000 Software Manual - 165 -3.5.16 Serial IPThe Serial IP menu item is used to configure serial communication such as POS device, serial data logging orserial transmitter via serial cable on the Red Lion RTU or router and third party UDP or TCP/IP Client/Serverapplication.Select the Serial IP menu item and the following dialog window appears:Enable Serial IP: Select Yes to enable the Serial IP interface.Configuration Description: Enter a description to describe the intent of this communication. Character limit is128.Select Interface: Select the interface to be used by clicking on the drop-down menu. The available optionsare: ttyS1 (RS-232), ttyS5 (RS-485) and ttyAUX0.Line Speed: Select the desired interface speed to be used via the provided drop-down. Consult theconfiguration of the remote device being attached, this setting must be compatible.Independent Activation: This option determines if the Serial Port of the device will accept data before theremote side is active. At least one of the two sides in the configuration must be set for Independent Activation.
