Automation Tab Revised 2017-08-31Local Station Drawing No. LP0997-C- 174 - Sixnet ® Series SN/RAM ® 6000 & RAM 9000 Software Manual3.6.1 Local StationClick on the Local Station sub menu item and the following menu appears:Enable Modbus: Select Yes to enable the Modbus option.Station Name (Required): Enter the name of the local station. The station name must be less than or equal to32 characters.Sation Number (Required): Enter the local station number. The station number must be in a range of 1 - 247.The values may be duplicated for other station as long as the station as long as the station can be uniquelyaddressed by an IP address or is connected on a serial port. Note: 0 is a broadcast address. 248-255 arereserved addresses.Modbus Local Port (Required): Enter a valid port number. The port must be within the range of 1 - 65535 andthe recommended default port is set to 502. Take care to choose a port number not already used by othersystem services. Consult StatusNetwork Socket Statuses TCP Only for a list of ports currently in use.Please note that a Firewall Allow rule will need to be added for remote access.Click Save to store the settings for the next reboot, or click Apply for the settings to take effect immediately.
