Genie GS-1530 manuals
GS-1530
Table of contents
- Table Of Contents
- Introduction
- Symbol and Hazard Pictorials Definitions
- General Safety
- Personal Safety
- Work Area Safety
- Legend
- Controls
- Inspections
- Operating Instructions
- workplace inspection
- operating instructions
- emergency stop
- To retract outrigger
- To determine slope grade
- Transport and Lifting Instructions
- Maintenance
- Specifications
GS-1530
Table of contents
GS-1530
Table of contents
GS-1530
Table of contents
- Introduction
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- D Machine Specifications
- D Hydraulic Hose and Fitting Torque Specifications
- Maintenance Inspection Report
- A-1 Inspect the Operator's and Safety Manuals
- A-3 Inspect for Damage and Loose or Missing Parts
- A-5 Check for Hydraulic Leaks
- A-7 Test the Manual Platform Lowering Operation
- A-8 Test the Tilt Sensor
- A-10 Test the Lift/Drive Select Switch (before serial number 17408)
- B-1 Check the Batteries
- B-2 Inspect the Electrical Wiring
- B-3 Inspect the Tires and Wheels (including castle nut torque)
- B-5 Test the Emergency Stop Buttons
- B-7 Test the Drive Brakes
- B-8 Test the Drive Speed - Stowed Position
- B-10 Perform Hydraulic Oil Analysis
- C-1 Replace the Hydraulic Filter
- D-1 Test or Replace the Hydraulic Oil
- Fault Code Chart Before Serial Number 17408
- Normal Operation Code Chart
- Fault Code Chart After Serial Number 17407
- All Functions Will Not Operate
- Pump Motor Will Not Operate
- All Functions Inoperative, Power Unit Starts and Runs
- Ground Controls Inoperative, Platform Controls Operate Normally
- Platform Controls Inoperative, Ground Controls Operate Normally
- Platform Up Function Inoperative
- Platform Down Function Inoperative
- Steer Left Function Inoperative
- Steer Right Function Inoperative
- All Drive Functions Inoperative, All Other Functions Operate Normally
- Drive Forward Function Inoperative
- Drive Reverse Function Inoperative
- Machine Will Not Drive At Full Speed
- Machine Drives At Full Speed With Platform Raised
- Module Tray Legend
- Electrical Symbols Legend
- Electrical Schematic (models before serial number 6901)
- Electrical Schematic (models from serial number 6901 to 8931)
- Electrical Schematic (models after serial number 8931)
- Ground Controls and Level Sensor Box Legend
- Platform Controls Legend (models before serial number 17408)
- Platform Controls Legend (models after serial number 17407)
- Hydraulic Symbols Legend
- Hydraulic Schematic
- Platform Controller
- Software Configuration
- Toggle Switches
- Platform
- Platform Extension
- Lift Cylinder
- Manual Platform Lowering Cable
- Function Pump
- Function Manifold Components
- Valve Adjustment - Function Manifold
- Yoke and Drive Motor
- Steering Cylinder
- Drive Brake
- Brake Release Hand Pump
manualsdatabase
Your AI-powered manual search engine