L3 comminications SERIES 5000 manuals
SERIES 5000
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Series 5000 Sonar System Operations and Maintenance Manual P/N 11210060, Rev
- APPENDIX A: Sample Towing Characteristics
- Equipment
- Computer Display and Control Unit
- Subsurface Equipment
- Theory of Operation
- Towfish
- Table 1-1: Towfish Connector—at Towfish
- Transceiver and Processing Unit
- Figure 1-7: AC Connector
- Sonar System
- Sonar Transceiver and Processing Unit (TPU)
- RS-232 COM 2 Port
- Transmitter
- Heading Sensor
- Steel Tow Cable
- Unpacking and Inspection
- Unpacking the Towfish
- Power Connection
- Power Line Fuse
- Grounding
- Tow Cable Electrical Connection
- Towfish and Optional Depressor Connection
- Tow Cable Disconnection
- Quick Start Installation and Operating Guide
- Deck Test
- At-Sea Test
- Installing SonarPro
- SonarPro Quick Start
- SonarPro Windows
- Selecting the Connection Type
- Operating in Real Time
- Survey Wizard
- Series 5000 Sonar System Towfish Setup
- Control Tab
- System—Towfish Diagnostics Tab
- Monitoring and Setting the Information Alarms
- Roll Alarm
- Recording Sonar Data
- Editing Pre-Recorded Data
- Selecting a New File
- Configuration Tab
- Tracker Tab
- Opening Additional Sonar Viewer Windows
- Navigation Window
- Setting up the Navigation Window Properties
- Using the Navigation Window Tool Bar
- Managing C-MAP Charts
- Managing C-MAP Licenses
- Managing Maptech Charts
- Displaying Outlines
- D Terrain Window
- Targets And Target Management
- Using the Target Window Tool Bar
- Managing Targets
- Target Measurement
- Setting up the User Preferences
- Setting up the General User Preferences
- Setting up the Compass Preferences
- Setting up the Target Preferences
- Arranging Windows
- Survey Routes
- Setting up a Survey Route
- Layback
- Figure 4-72: The Cable Out Dialog Box
- Towfish Depth
- Printing with SonarPro
- Operating SonarPro With Dual Displays
- between Them
- Windows (Bottom)
- Raw Channel Data
- Operating the Wing
- Selecting the Emergency Activation COM Port
- Depth and Altitude Displays
- Operating SonarPro with a Series 3000 Sonar System
- Palette Control Tab
- Figure 4-92: The Sub Bottom Profiler Scan Window
- Series 3000 Sonar System Towfish Setup
- Notes on Time Usage
- IRIG
- CHAPTER 5: Equipment Maintenance
- Weekly Maintenance Checklist
- Replacing the Fixed Tail Cone Assembly
- Figure 5-5: Tail Cone Being Tightened With Screwdriver and Key
- Removing the Fixed Tail Cone Assembly
- CHAPTER 6: Splashproof TPU
- Venting the Splashproof TPU
- general description
- Operator Controls and Indicators
- Figure 6-5: Front Panel of VME Chassis inside Splashproof TPU
- Functional Components
- Setting up and Connecting the Splashproof TPU
- Activating the Splashproof TPU
- Specifications
- Figure A-1: Cable Length vs. Towfish Depth Graph 1
- Figure A-2: Cable Length vs. Towfish Depth Graph 2
- Figure A-3: Cable Length vs. Towfish Depth Graph 3
- Figure A-4: Cable Length vs. Towfish Depth Graph 4
- Figure A-5: Cable Length vs. Towfish Depth Graph 5
- B.1 Unreeling Tow Cable
- B.2 Uncoiling Tow Cable
- B.3.2 Effect of Cable Kinking
- C.1 Control Methods
- C.3 Remote Control
- C.4 Snapshots
- C.5 Messages
- C.5.2 Heartbeat Message
- C.6 Towfish Commands
- C.6.2 5000 System Transmitter Commands
- C.6.3 System 5000 Actuator Commands
- C.6.6 System 5900 MUX Commands
- C.6.7 System 5900 DSP Commands
- C.6.9 System x000 Sub-Bottom Profiler (SBP) Commands
- C.6.10 Datalogger On/Off commands
- and Troubleshooting
- D.1 Basic System Requirements
- D.3 Installing SonarPro
- D.4.2 Windows 2000 LAN Configuration Setup
- D.4.3 Windows XP LAN Configuration Setup
- D.5 TPU LAN Configuration Setup
- D.6 Different Cable Lengths and the Startup.ini File
- D.6.1 Tow Cable Considerations
- D.6.2 Measuring Cable Insertion Loss
- D.6.3 Spare Tow Cable
- D.7.1 Input Power
- D.7.2 Towfish Fuse
- D.7.5 Power Supplies
- D.7.6 TPU Power up and Test Sequence
- D.8 Towfish
- D.8.1 Testing the Towfish
- D.8.3 Checking the Transmitters before Deployment
- Trouble Shooting Chart
- D.8.6 Towfish Bottle Electronics
- Figure D-19: Towfish Electronics
- D.8.8 Towfish Telemetry
- D.8.10 Checking the Multiplexer Board
- D.8.11 Checking the Transmitter Board
- D.8.13 Checking the DSP Board
- D.8.14 Checking the Sensors
- D.8.15 Calibrating the Optional Temperature Probe
- D.8.17 Calibrating the Compass
- D.8.18 Series 5000 Sonar System Towfish Commands
- D.9 Software Troubleshooting
- D.11 Problem Troubleshooting
- D.11.1 Recommended Test Equipment
- D.11.2 Spare Boards and Components
- D.12 Cable Pinouts
- D.13 NMEA 0183 Formats and Information
manualsdatabase
Your AI-powered manual search engine