Configuring TCP/IP on Windows NT 4.0 133Figure 63 Microsoft TCP/IP Properties Dialog Box4 Verify that the TCP/IP settings are correct.■ If a DHCP server automatically assigns IP addresses on the network,click Obtain an IP address automatically.■ If static IP addresses are assigned to computers on the network, clickSpecify an IP address, and then do the following:■ In IP Address, type an IP address that belongs to the same range asthe IP address assigned to the Access Point. For example, if theAccess Point is using its default IP address (192.168.0.228), typean IP address within the range 192.168.0.1 to 192.168.0.255(except 192.168.0.228).■ In Subnet Mask, type the same subnet mask that is assigned to theAccess Point. For example, if the mask that is assigned to theAccess Point is 255.255.255.0, type 255.255.255.0.5 Click OK.You may have to restart the wireless station for the changes to takeeffect.
