Configuring System Settings 51■ If you have a DHCP server on the network and you want the AccessPoint to automatically obtain its IP address from the DHCP server, clickDHCP Client.■ If you do not have a DHCP server on the network, click Fixed IPAddress. The Access Point will use its default IP address(192.168.0.228) and subnet mask (255.255.255.0). If these IPsettings do not match your network settings, change them to ensurethat the Access Point and other devices on the network cancommunicate with each other.4 If you have a WINS server on the network, and you want to use it toresolve names and addresses used by the Access Point, click Enable WINS,and then type the host name or IP address in WINS Server Name/IPAddress.5 Click Save, and then Apply/Restart.
