26 CHAPTER 2: INSTALLING AND CONNECTING THE ACCESS POINT6 Click OK.Without a DHCPServerIf you do not have a DHCP server on the network, you need toreconfigure the TCP/IP settings of the admin computer to be able toconnect to the Access Point’s Web interface.1 Open the Properties dialog box of the network interface card that thecomputer is using to connect to the wired local network.2 Click Internet Protocol, and then click Properties.3 On the General tab, click Use the following IP address.4 Assign an IP address and a subnet mask to the computer.■ In IP address, type any IP address within the range of 192.168.0.1 to192.168.0.255, except 192.168.0.228.■ In Subnet mask, ensure that it is set to 255.255.255.0.5 Click OK.6 Start your Web browser.7 In the Address or Location bar, type http://192.168.0.228. Anauthentication dialog box appears.8 In User name, type admin, and in Password, type password.User name and password are case-sensitive.9 Click OK.The interface loads in your Web browser.
