3Com 3CRGPC10075 User Manual

Also see for 3CRGPC10075: Declaration of conformity

Contents

Defining Security Profiles 37Table 9 Options for 802.1xOption DescriptionRADIUS ServerAddressType the host name or IP address of the RADIUS server onthe networkRADIUS Port Type the port number used for connections to the RADIUSserver.Client Login Name This read-only field displays the name used for the clientlogin on the RADIUS server. This logon name must becreated on the RADIUS server. On some RADIUS servers, youcan use the Access Point’s IP address instead of this name.Shared Key Key used for client logon to the RADIUS Server. Type a keyvalue that matches the value on the RADIUS Server.WEP Key Size Select the preferred WEP key size:■ 64 bit – Data is encrypted, using the default key, beforebeing transmitted. You must enter at least the defaultkey. For 64 bit encryption, the key size is 5 chars (ASCII)or 10 chars in HEX (0~9 and A~F).■ 128 bit – Data is encrypted, using the default key, beforebeing transmitted. You must enter at least the defaultkey. For 128 bit encryption, the key size is 13 chars(ASCII) or 26 chars in HEX (0~9 and A~F).■ 156 Bit – Data is encrypted, using the default key, beforebeing transmitted. You must enter at least the defaultkey. For 156 bit encryption, the key size is 16 chars(ASCII) or 32 chars in HEX (0~9 and A~F).Dynamic WEP key(EAP-TLS, PEAP)If checked, the required WEP key is dynamically generated.This may use EAP-TLS, PEAP, or another method, dependingon the methods supported by the client.■ Key Exchange – Enable this if you want dynamic keys tobe exchanged and updated regularly. If enabled, youneed to specify the Key Lifetime.Static WEP key(EAP-MD5)If enabled, this uses EAP-MD5. You must enter the WEP keyon the WEP Key field below, and on each wireless station.The WEP Key Index must also match the key index used onother wireless stations.RADIUS Accounting Sends accounting data from the Access Point to the RADIUSserver.■ To enable, select the Enable RADIUS Accounting checkbox, and the, in RADIUS Accounting Port, type thecorresponding port number.■ Define interval at which updated data will be sent to theRADIUS server by selecting the Update Report every [ ]Minutes check box, and specifying a number minutes.