3Com OfficeConnect 3CR414492 Getting Started Manual

Contents

3Com OfficeConnect 3CR414492 Getting Started Manual Manual pdf 15 page image

OCR 812 Boot Mode Options 1-7Setting DHCP Smart ModeYou can use the DHCP Smart Mode if: You plan on using private addresses on the LAN (suchas, your Service Provider has provided you with only 1public IP address) You plan on using the server for the OCR 812 DHCPThe OCR 812 will automatically start up with the following“DHCP Smart Mode” configuration: LAN IP address = 192.168.200.254, Netmask255.255.255.0. DHCP IP address pool (40 addresses): 192.168.200.1-40 Domain Name: dummy.net DNS Host: name = ocrdsl-3com.com,address =192.168.200.254 Administrative Login profile, User Name: root andPassword:!rootSetting Bridge ModeUse this mode if you want the OCR 812 to function as abridge automatically, with no special configuration. You arenot required to use the IP Wizard or install any softwarefrom the CD unless: You want to change the configuration. You want to use Instant Update when a softwareupdate to your OCR 812 is posted on the 3Com website. You can install Instant Update from the CD at anytime. For more information, see the OfficeConnectRemote 812 Online User’s Guide.1 Verify the Virtual Path Identifier/Virtual Channel Identifier(VPI/VCI) settings in Table 1-2. These settings areparameters that are connected with the AsynchronousTransfer Mode (ATM). For more detailed information, seethe OfficeConnect Remote 812 Online User’s Guide.2 Match the values your Service Provider has given you. Seethe table under DIP Switch Settings. The OCR 812 will startup with the following configuration: Bridge network on the LAN Interface