3Com OfficeConnect 3CR414492 Getting Started Manual

Contents

3Com OfficeConnect 3CR414492 Getting Started Manual Manual pdf 27 page image

Configuring the OfficeConnect Remote 812 Manager 2-9Installing Instant UpdateYou may optionally choose to install the 3Com InstantUpdate utility. Instant Update periodically checks the 3Comweb site for a new release of the OCR 812 code. When anew release of the code is found, Instant Update copies itto your workstation. You then need to install the code ontoyour OCR 812 unit.To Install Instant Update On the CD, click the button, “Install 3Com InstantUpdate”.Configuring the OfficeConnect Remote 812 ManagerYou can configure the OfficeConnect Remote 812Manager using one of the following methods: Bridge Only mode DHCP Smart Mode Unconfigured mode Command line interfaceConfiguring in Bridge Only ModeIf you select Bridge Only Mode as your Boot Option, checkthe DIP switch settings on your unit. See DIP SwitchSettings for more information. If your unit’s settings are thesame as the DIP switch settings, you do not need to changeanything. However, if the settings are different and youneed to change them, contact your Internet ServiceProvider (ISP) for more information.Changing the Login Name and PasswordIf you assign the IP address with DHCP Smart Mode or withthe Remote 812 IP Configuration Wizard, theadministrative login name is root and the password is!root.NOTE: After you access the unit with your web browser,delete this login profile and create a new one with a securename and password. (Maximum character length of loginname = 32, password maximum character length = 15.)