B-2 A PPENDIX B: S AFETY INFORMATION Ensure nothing rests on the unit’s system cables and that thecables are not located where they can be stepped on andcause damage to the unit. Keep the unit away from radiators and heat sources. Allow25 mm (1 inch) around the unit or stack to provideadequate air circulation. Install the unit in a clean area that is free from dust orextreme temperatures. The unit has been designed to be a free-standing unit orstacked with other OfficeConnect Remote units. Do notplace anything else on top of the unit’s case. Allow a clearance gap of at least 50 mm (2 in) from the rearpanel of the unit, to allow for cable access. This unit contains a lithium battery which is attached to amicrochip on the printed circuit board. The defective batterymust be disposed of safely in accordance with themanufacturers instructions.Cette unité contient une pile au lithium attachée à une pucesur la carte à circuit imprimé. Se débarrasser de la piledéfectueuse en toute sécurité conformément aux instructionsdu fabricant. Normal operations of this unit could be interrupted by alightning surge. In this event, the user must recycle thepower to the unit in order to establish normal operatingconditions.Important Safety InformationWARNING: Warnings contain directions that you must follow foryour personal safety. Follow all instructions carefully.Please read the following information carefully and thoroughlybefore installing the unit: Take exceptional care during the installation and removal ofthe unit. Locate the unit close to the main socket outlet, and ensurethat the main socket is accessible. Use the power adapter supplied with the unit to ensurecompliance with national and international safety standards. Ifthere is no power adapter supplied, the main cordset usedmust be compliant with the local and national regulations ofthe target country and must not violate the safety approval ofthe product. See the 3Com Corporation Limited Warranty atthe end of this book.

Introduction

What Can the OCR 812 Do?

SuperNAT

Encryption Protocols

Setting DHCP Smart Mode

Setting Unconfigured Mode

Installing the OCR 812 Hardware

Configuring the OfficeConnect Remote 812 Hardware

LED Light Operation

Configuring the Workstation and Selecting a Mode

Using the Unconfigured Mode

Prerequisites

Installing Adobe Acrobat

Installing Instant Update

Configuring in DHCP Smart Mode

Starting the OfficeConnect Remote 812 Manager

Configuration Using the Remote 812 IP Configuration Wizard

Network Service

Port Address Translation

Resetting the Configuration of Your Router

General Testing

Step 2: Check Network Status

IP Testing

DNS Errors

Option 3: Internet Browser (Internet Access Only)

dhcp c lient

important safety information

wichtige sicherheitsinformationen

important notice de securite

medidas de seguridad importantes

informazioni importanti per la sicurezza

general specifications

Power requirements C

3Com OfficeConnect 3CR414492 Getting Started Manual

OfficeConnect 3CR414492

OfficeConnect Remote 812