3Com OfficeConnect 3CR414492 Getting Started Manual

Contents

3Com OfficeConnect 3CR414492 Getting Started Manual Manual pdf 41 page image

A C ONFIGURING YOURWORKSTATION TO BE ADHCP CLIENTWorkstation Configuration Using DHCP Smart ModeIf you have chosen DHCP Smart Mode, you need toconfigure some parameters on your workstation.Set up the workstations on the OCR 812 LAN toautomatically obtain their IP address. This is the defaultsetting in Windows 95.If you have configured IP addresses manually on your LAN,you should use the following procedure on eachworkstation to allow them to automatically learn the newaddresses instead.The following is an example of this procedure as it runs onWindows 95.1 Open the Control Panel. Select Network > Configuration> TCP/IP to access the TCP/IP Properties Menu.2 Select the Gateway tab. Remove any IP addresses in theInstalled Gateways field.