90 CHAPTER 7: USING THE VCX USER INTERFACEThe Call Forwarding Fall Back option can only be enabled when thecall coverage is set to the Send to Voice Mail option. The CallForwarding Fall Back option must be disabled if the Send to Numberor No Coverage option is selected.■ A telephone number (internal, external or auto attendant)Call coverage can be set to an auto attendant by entering the autoattendant number in the Send to Number box. If an auto attendant isconfigured, the Call Forwarding Fall Back option must be disabled.■ No coverageIf the No Coverage option is selected and a call is not answered, thecaller will hear a busy tone or an error message depending on thereason for the unanswered call.If you enable Do Not Disturb on your phone, calls will automatically go tothe call coverage point, which may or may not be voice mail.The call coverage point must be set through the VCX User Interface (orthe Administrator Interface). It cannot be set through the Telephone UserInterface.Logging Out To log out of the VCX User Interface, follow these steps:1 From any screen, click the Log Out button just above the copyrightnotice.The Login screen appears.2 Close your web browser.
