Additional parameter data 3017Additional parameter dataWhat this chapter containsThis chapter lists the parameters with some additional data such as their ranges and32-bit fieldbus scaling. For parameter descriptions, see chapter Parameters (page99).Terms and abbreviationsTerm DefinitionActual signal Signal measured or calculated by the drive. Usually can only be monitoredbut not adjusted; some counter-type signals can however be reset.Analog src Analog source: the parameter can be set to the value of another parameterby choosing “Other”, and selecting the source parameter from a list.In addition to the “Other” selection, the parameter may offer other pre-selected settings.Binary src Binary source: the value of the parameter can be taken from a specific bitin another parameter value (“Other”). Sometimes the value can be fixed to0 (false) or 1 (true). In addition, the parameter may offer other pre-selectedsettings.Data Data parameterFbEq32 32-bit fieldbus equivalent: The scaling between the value shown on thepanel and the integer used in communication when a 32-bit value isselected for transmission to an external system.The corresponding 16-bit scalings are listed in chapter Parameters (page99).List Selection list.
