![ABB ACQ580 Firmware Manual Manual pdf 98 page image](https://manuals-archive2.s3.amazonaws.com/4817051/c036bfe5bb0bc8ef7441af29bac3ea6498f.jpg)
94 Program features Diagnostics menuThe Diagnostics menu provides quick information about active faults, warnings andinhibits in the drive and how to fix and reset them. It also helps you to find out why thedrive is not starting, stopping or running at the desired speed.• Drive actual values: Use this view to see the drive actual state.• Active faults: Use this view to see currently active faults and how to fix and resetthem.• Active warnings: Use this view to see currently active warnings and how to fixthem.• Active inhibits: Use this view to see the active inhibits and how to fix them. Inaddition, in the Clock, region, display menu you can disable (enabled by default)and pop-up views showing information on inhibits when you try to start the drivebut it is prevented.• Fault & event log: Use this view to see the list of faults, warnings and otherevents that have occurred in the drive.• Start/stop/reference summary: Use this view to find out where the controlcomes from if the drive is not starting or stopping as expected, or runs at anundesired speed.• Limit status: Use this view to find out whether any limitations are active if thedrive is running at undesired speed.• Fieldbus: Use this view to find out status information and sent and received datafrom fieldbus.• Load profile: Use this view to see the status information of load distribution (thatis, drive running time spent on each load level) and peak load levels.• Motor summary: Use this view to find out motor nominal values, control modeand whether ID run has been completed.Settings• Menu - Diagnostics• Menu - Primary settings - Clock, region, display - Show inhibit pop-up.