12 Introduction to the manualTarget audienceThe reader is expected to know the fundamentals of electricity, wiring, electricalcomponents and electrical schematic symbols.The manual is written for readers worldwide. Both SI and imperial units are shown.Purpose of the manualThis manual provided information for designing, commissioning, or operating thedrive system.Contents of the manual• Introduction to the manual (this chapter) describes the applicability, purpose andcontent of the manual, and terms and conditions.• Control panel (page 17) introduces the internal control panel.• Start-up, ID run and use (page 23) contains instructions on how to start up thedrive and perform the ID run, and descriptions of the main use cases.• Control macros (page 29) contains macro connection diagrams and descriptions.• Program features (page 49) describes the program features and parameters.• Parameters (page 101) lists the parameters.• Additional parameter data (page 313) lists the 32-bit parameters used to programthe drive.• Fault tracing (page 345) lists faults and warnings with their explanations andsolutions.• Fieldbus control through the embedded fieldbus interface (EFB) (page 367)describes the communication to and from a fieldbus network using the embeddedfieldbus interface of the drive.• Fieldbus control through a fieldbus adapter (page 431) describes thecommunication to and from a fieldbus network using an optional fieldbus module.• Control chain diagrams (page 445) presents the reference chains of the drive.
