438 Fieldbus control through a fieldbus adapter Contents of the fieldbus Status wordThe upper case boldface text refers to the states shown in the state diagram onpage 439.11 Ext ctrl loc 1 Select External Control Location EXT2. Effective if controllocation is parameterized to be selected from fieldbus.0 Select External Control Location EXT1. Effective if controllocation is parameterized to be selected from fieldbus.12 User bit 0 1 TBA0 Writable control bits that can be combined with drive logic forapplication-specific functionality.13 User bit 1 1 TBA0 TBA14 User bit 2 1 TBA0 TBA15 User bit 3 1 TBA0 TBABit Name Value State/Description0 Ready to switchON1 READY TO SWITCH ON.0 NOT READY TO SWITCH ON.1 Ready run 1 READY TO OPERATE.0 OFF1 ACTIVE.2 Ready ref 1 OPERATION ENABLED.0 OPERATION INHIBITED.3 Tripped 1 FAULT.0 No fault.4 Off 2 inactive 1 OFF2 inactive.0 OFF2 ACTIVE.5 Off 3 inactive 1 OFF3 inactive.0 OFF3 ACTIVE.6 Switch-oninhibited1 SWITCH-ON INHIBITED.0 –7 Warning 1 Warning active.0 No warning active.8 At setpoint 1 OPERATING. Actual value equals reference = is withintolerance limits (see parameters 46.21…46.23).0 Actual value differs from reference = is outside tolerancelimits.9 Remote 1 Drive control location: REMOTE (EXT1 or EXT2).0 Drive control location: LOCAL.10 Above limit - See bit 10 of 06.17 Drive status word 2.11 User bit 0 - See parameter 06.30 MSW bit 11 selection.12 User bit 1 - See parameter 06.31 MSW bit 12 selection.13 User bit 2 - See parameter 06.32 MSW bit 13 selection.14 User bit 3 - See parameter 06.33 MSW bit 14 selection.15 ReservedBit Name Value State/Description
