248 Parameters4444 Mechanical brakecontrolConfiguration of mechanical brake control.See also parameter groups 40 Process PID set 1 and 41Process PID set 2.44.01 Brake control status Displays the mechanical brake control status word.This parameter is read-only.-0000h…FFFFh Mechanical brake control status word. 1 = 144.02 Brake torque memory Displays the torque (in percent) at the instant of theprevious brake close command.This value can be used as a reference for the brake opentorque. See parameters 44.09 Brake open torque sourceand 44.10 Brake open torque.--1600.0 … 1600.0% Torque at brake closure. See par.46.0344.03 Brake open torquereferenceDisplays the currently active brake open torque. Seeparameters 44.09 Brake open torque source and 44.10Brake open torque.This parameter is read-only.--1600.0 … 1600.0% Currently active brake open torque. See par.46.0344.06 Brake control enable Activates/deactivates (or selects a source thatactivates/deactivates) the mechanical brake control logic.0 = Brake control inactive1 = Brake control activeNot selectedNot selected 0. 0Selected 1. 1DI1 Digital input DI1 (10.02 DI delayed status, bit 0). 2DI2 Digital input DI2 (10.02 DI delayed status, bit 1). 3DI3 Digital input DI3 (10.02 DI delayed status, bit 2). 4DI4 Digital input DI4 (10.02 DI delayed status, bit 3). 5DIO1 Digital input/output DIO1 (11.02 DIO delayed status, bit 0). 10DIO2 Digital input/output DIO2 (11.02 DIO delayed status, bit 1) 11No. Name/Value Description DefaultFbEq 16Bit Name Information0 Open command Close/open command to brake actuator (0 = close, 1 = open).Connect this bit to desired output.1 Opening torquerequest1 = Opening torque requested from drive logic2 Hold stoppedrequest1 = Hold requested from drive logic3 Ramp to stopped 1 = Ramping down to zero speed requested from drive logic4 Enabled 1 = Brake control is enabled5 Closed 1 = Brake control logic in BRAKE CLOSED state6 Opening 1 = Brake control logic in BRAKE OPENING state7 Open 1 = Brake control logic in BRAKE OPEN state8 Closing 1 = Brake control logic in BRAKE CLOSING state9…15 Reserved
