Start-up, ID run and use 27Set the drive parametersOpen Diagnostics1. Select the Main menu from the Home view.2. Scroll to Parameters, and press the OK button to openthe submenu.3. Select the complete parameters list with the arrow buttonand press the OK button, or4. Select the modified parameters list with the arrow buttonand press the OK button.5. Select the parameter and press the OK button.The parameters are shown in respective groups. Thefirst two digits of the parameter number represent theparameter group. For example, parameters starting with30 are in the Limits group.See chapter Parameters for more information.1. Select the Main menu from the Home view.2. Scroll to Diagnostics and press the OK button to openthe submenu.3. Select the warning or fault with the arrow button andpress the OK button.See chapter Fault tracing for more information.
