Safety instructions 15Possible residual risksThe following risks can arise from a drive system and pose a hazard to people. Theserisks must therefore be taken into account by the system integrator and / or the plantowner when assessing the risks of the machinery.• Electric power equipment generates electro-magnetic fields which can cause a hazardto people with metal implants and / or a pacemaker.• Drive system components can move unintentionally when being commissioned,operated, or serviced due to, for example:• Operation of the equipment outside the scope of the specifications• Incorrectly assembled or installed equipment• Wrongly connected cables• External influence on, or damage of the equipment• Wrong parameter settings• Software errors• Faulty hardware.• Hazardous touch voltages can be present on drive system components caused by, forexample:• Operation of the equipment outside the scope of the specifications• External influence on, or damage of the equipment• Induced voltages by external equipment (e.g. induced voltage from a spinningrotor)• Condensation on equipment components, or pollution• Faulty hardware.• High temperatures, noise, particles, or gases can be emitted from drive systemcomponents caused by, for example:• Operation of the equipment outside the scope of the specifications• External influence on, or damage of the equipment• Wrong parameter settings• Software errors• Faulty hardware.• Hazardous substances can be emitted from drive system components due to, forexample:• Incorrect disposal of components.
