16 Safety instructionsSafety labelsSafety labels are attached to the cabinet where necessary to alert personnel of potentialhazards when working on the equipment. The instructions on the safety labels mustalways be followed, and the labels must be kept in a perfectly legible condition.General safety in installation, start-up and maintenanceThese instructions are for all personnel that install the drive and do maintenance work onit:• If you select an external source for the start command and it is on, the drive will startimmediately after fault reset unless you configure the drive for pulse start. See thefirmware manual.• When the control location is not set to Local, the stop key on the control panel will notstop the drive.⌘ NOTICEDANGERHazardous voltage inside!Before servicing this unit:1.Turn off and lock out facility power.2. Wait 15 minutes for discharge.Do not open door by force!2UBA004820R0009
