Installation examplesWARNING!The code labels attached to mechanical parts such as busbars, shroudsand sheet metal parts must be removed before installation as they maycause bad electrical connections, or, after peeling off and collecting dustin time, cause arcing or block the cooling air flow.This section instructs in placing the modules and additional equipment into a user-definedcabinet.Each example includes a table that lists:• installation stages of different equipment in the order in which the installation into thecabinet should be performed• code of the step-by-step instructions• equipment kit code• kit ordering code.You can find the kit-specific assembly drawings, step-by-step instructions and kit informationon the Internet. Go to https://sites-apps.abb.com/sites/lvacdrivesengineeringsupport/content.If needed, contact your local ABB representative.The example includes also cabinet assembly drawings that show each stage listed in thetable. More detailed steps of each stage are described in the kit-specific assembly drawings.For general instructions, see Cabinet design and construction instructions for drive modules(3AUA0000107668 [English]).Cabinet construction 3710
