Introduction to the manual 111Introduction to the manualWhat this chapter containsThis chapter describes the contents of the manual. It also contains information on thecompatibility, safety and intended audience.ApplicabilityThis manual applies to ACS880 primary control program version 2.8x or later.The firmware version of the control program is visible in parameter 07.05 Firmwareversion, or the System info in the main menu on the drive control panel.Safety instructionsFollow all safety instructions delivered with the drive.• Read the complete safety instructions before you install, commission, or usethe drive. The complete safety instructions are delivered with the drive as eitherpart of the Hardware manual, or, in the case of ACS880 multidrives, as a separatedocument.• Read the firmware function-specific warnings and notes before changingparameter values. These warnings and notes are included in the parameterdescriptions presented in chapter Parameters.Target audienceThis manual is intended for people who design, commission, or operate the drivesystem.ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
