412 Parameters95.21 HW options word 2 Specifies more hardware-related options that requiredifferentiated parameter defaults. See parameter 95.20 HWoptions word 1.WARNING! After switching any bits in this word,recheck the values of the affected parameters.-0000b…0111b Hardware options configuration word 2. 1 = 195.30 Parallel type listfilter(Only visible with a BCU control unit)Filters the list of drive/inverter types listed by parameter 95.31Parallel type configuration.All typesAll types All types listed. 0-3 (380-415V) -3 (380…415 V) types listed. 1-5 (380-500V) -5 (380…500 V) types listed. 2-7 (525-690V) -7 (525…690 V) types listed. 395.31 Parallel typeconfiguration(Only visible with a BCU control unit)Defines the drive/inverter type if it consists of parallel-connected modules.If the drive/inverter consists of a single module, leave thevalue at Not selected.Not selectedNot selected The drive/inverter does not consist of parallel-connectedmodules, or type not selected.0[Drive/inverter type] Drive/inverter type consisting of parallel-connected modules. -95.40 Transformation ratio Defines the ratio of the step-up transformer. 0.0000.000 … 100.000 Step-up transformer ratio. 1000 = 19696 System Language selection; access levels; macro selection;parameter save and restore; control unit reboot; userparameter sets; unit selection; data logger triggering;parameter checksum calculation; user lock.96.01 Language Selects the language of the parameter interface and otherdisplayed information when viewed on the control panel.Notes:• Not all languages listed below are necessarily supported.• This parameter does not affect the languages visible in theDrive composer PC tool. (Those are specified under View –Settings.)-Not selected None. 0English English. 1033No. Name/Value Description Def/FbEq16Bit Name Information0 Dual use 1 = Dual use active. For drives with option +N8200. (Allows higheroutput frequencies and frequency reference limits.)1 SynRM 1 = Synchronous reluctance motor used. Affects parameters 25.02,25.03, 25.15, 99.03, 99.13.2 Salient PM 1 = Salient-pole permanent magnet motor used. Affects parameters25.02, 25.03, 25.15, 99.03, 99.13.3 LV Synchro 1 = Externally-excited synchronous motor used. Requires a license.Contact your local ABB representative for more information.4…15 Reservedghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
