402 ParametersEven Even parity indication bit, one stop bit. 192.46 Hiperface baud rate (Visible when an absolute encoder is selected)Defines the transfer rate of the link with a HIPERFACEencoder.Typically this parameter need not be set.4800 bits/s4800 bits/s 4800 bit/s. 09600 bits/s 9600 bit/s. 119200 bits/s 19200 bit/s. 238400 bits/s 38400 bit/s. 392.47 Hiperface nodeaddress(Visible when an absolute encoder is selected)Defines the node address for a HIPERFACE encoder.Typically this parameter need not be set.640…255 HIPERFACE encoder node address. -9393 Encoder 2configurationSettings for encoder 2.Notes:• The contents of the parameter group vary according to theselected encoder type.• It is recommended that encoder connection 1 (group 92Encoder 1 configuration) is used whenever possible sincethe data received through that interface is fresher than thedata received through connection 2 (this group).93.01 Encoder 2 type Selects the type of encoder/resolver 2. NoneconfiguredNone configured None. 0TTL TTL. Module type (input): FEN-01 (X31), FEN-11 (X41) orFEN-21 (X51).1TTL+ TTL+. Module type (input): FEN-01 (X32). 2Absolute encoder Absolute encoder. Module type (input): FEN-11 (X42). 3Resolver Resolver. Module type (input): FEN-21 (X52). 4HTL HTL. Module type (input): FEN-31 (X82). 5HTL 1 HTL. Module type (input): FSE-31 (X31). 6HTL 2 HTL. Module type (input): FSE-31 (X32). Not supported at thetime of publication.793.02 Encoder 2 source Selects the interface module that the encoder is connected to.(The physical locations and types of encoder interfacemodules are defined in parameter group 91 Encoder modulesettings.)Module 1Module 1 Interface module 1. 1Module 2 Interface module 2. 293.10 Pulses/rev (Visible when a TTL, TTL+ or HTL encoder is selected)See parameter 92.10 Pulses/revolution.204893.10 Sine/cosine number (Visible when an absolute encoder is selected)See parameter 92.10 Sine/cosine number.093.10 Excitation signalfrequency(Visible when a resolver is selected)See parameter 92.10 Excitation signal frequency.1 kHz93.11 Pulse encoder type (Visible when a TTL, TTL+ or HTL encoder is selected)See parameter 92.11 Pulse encoder type.QuadratureNo. Name/Value Description Def/FbEq16ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
