28 Mechanical installationMounting the adapter moduleThe adapter module is to be inserted into its specific position in thedrive. The module is held in place with plastic pins and one screw.The screw also provides the electrical connection between themodule and drive frame for cable shield termination.When the module is installed, the signal and power connection tothe drive is made through a 20-pin connector. (All drives do not useall the available signals so the connector on the drive may havefewer pins.)Mounting procedure:1. Insert the module carefully into its position on the drive.2. Fasten the screw.Note: It is essential to install the screw properly to fulfill the EMCrequirements and to ensure the proper operation of the module.For more information on mounting, see the drive manuals.
