80 Communication profilesRun Forward & Run Reverse(Control supervisor object)These attributes are used to assert run and stop commands to theControl supervisor object state machine according to the followingRun/Stop event matrix. See State (Control supervisor object) onpage 60.Fault Reset (Control supervisor object)This attribute resets a drive fault on a transition from zero to one ifthe condition that caused the fault has been cleared.Net Ctrl (Control supervisor object)This attribute requests that the drive Run/Stop command issupplied locally (Net Ctrl = 0) or by the network (Net Ctrl = 1).Net Ref (AC/DC drive object)This attribute requests that the drive Speed and TorqueReferences are supplied locally (Net Ref = 0) or by the network(Net Ref = 1).Speed Reference (AC/DC drive object)This attribute is the speed reference for the drive. The units arescaled by the Speed Scale attribute of the AC/DC drive object. SeeTable 4. for details.RunFwd RunRev Trigger event Run type0 0 Stop N/A0 → 1 0 Run RunFwd0 0 → 1 Run RunRev0 → 1 0 → 1 No Action N/A1 1 No Action N/A0 → 1 1 Run RunRev1 1 → 0 Run RunFwd
