12.3.3 Setting guidelines GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2Operation:On orOff12.4 Logic for group alarm WRNCALH12.4.1 Identification GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v4Function description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberLogic for group warning WRNCALH - -12.4.1.1 Application GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1Group warning logic function WRNCALH is used to route warning signals to LEDs and/oroutput contacts on the IED.WRNCALH output signal WARNING and the physical outputs allows the user to adapt thewarning signal to physical tripping outputs according to the specific application needs.12.4.1.2 Setting guidelines GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2OperationOn orOff12.5 Logic for group indication INDCALH12.5.1 Identification GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v4Function description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberLogic for group indication INDCALH - -12.5.1.1 Application GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1Group indication logic function INDCALH is used to route indication signals to different LEDsand/or output contacts on the IED.INDCALH output signal IND and the physical outputs allows the user to adapt the indicationsignal to physical outputs according to the specific application needs.12.5.1.2 Setting guidelines GUID-7E776D39-1A42-4F90-BF50-9B38F494A01E v2Operation:On orOff12.6 Configurable logic blocks IP11009-1 v3The configurable logic blocks are available in two categories:Section 12 1MRK 504 158-UEN ALogic186Application manual
