ADJ Vizi Beam Hybrid 2R User Instructions

Also see for Vizi Beam Hybrid 2R: User manual

Contents

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 19Vizi Beam Hybrid 2R System Menu4. Press ENTER to to make your selection, or press MODE/ESCbutton to exit.INFORMATIONTime Information (Time information is always represented inhours)Current Running Time - This will allow you to check units currentrunning time.1. Press the MODE/ESC button to access the main menu. Pressthe UP or DOWN buttons so that “Information” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Time Information” is dis-played, press ENTER.3. Press UP or DOWN buttons, until “Current Time” is displayed,and press ENTER.4. “XXXX” will now be displayed. “XXXX” represents the current run-ning time.5. Press ENTER or press MODE/ESC to exit.Total Running Time - This will allow you to check units total runningtime.1. Press the MODE/ESC button to access the main menu. Pressthe UP or DOWN buttons so that “Information” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Time Information” is dis-played, press ENTER.3. Press UP or DOWN buttons, until “Total Run Time” is displayed,and press ENTER.4. “XXXX” will now be displayed. “XXXX” represents the total run-ning time.5. Press ENTER or press MODE/ESC to exit.Last Run Time - This will allow you to check the last running time ofADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 40Universal DMX Control: This function allows you to use a uni-versal DMX-512 controller such as the Elation® DMX Operator™or Elation® Show Designer™ to control head movement, the colorwheel, gobo wheel, prism, master dimmer, shutter (strobe), and vari-ous other features. A DMX controller allows you to create unique pro-grams tailored to your individual needs.1. The Vizi Beam Hybrid 2R has a 10 Channel mode, 12 Channelmode, and 16 Channel mode. See pages 42-53 for detaileddescription of the DMX traits.2. To control your fixture in DMX mode, follow the set-up procedureson pages 13-15 as well as the set-up specifications that areincluded with your DMX controller.3. Use the controller’s faders to control the various DMX fixture traits.4. This will allow you to create your own programs.5. Follow the directions on page 36 to select your DMX Channelmode, and follow the instruction on page 17 to set the DMXaddress.6. For longer cable runs (more than a 100 feet) use a terminator onthe last fixture.7. For help operating in DMX mode consult the manual includedwith your DMX controller.Stand-Alone (Sound Active or Auto Program): This mode allowsa single unit to run to the beat of the music or run through a built-inprogram.AUTO PROGRAM:1. Access the main menu, and press the UP or DOWN buttons sothat “Function” is highlighted, then press ENTER.2. Press the UP or DOWN buttons until “Auto Program” is dis-played, and press ENTER.3. Either “Master” or “Alone” will be displayed. Using the UP orDOWN buttons select “Alone” and press ENTER.SOUND ACTIVE:1. Access the main menu, and press the UP or DOWN buttons sothat “Function” is highlighted, then press ENTER.2. Press the UP or DOWN buttons until “Sound Control” is dis-played, press ENTER.3. Either “Master” or “Alone” will be displayed. Using the UP orVizi Beam Hybrid 2R Operation