ADJ Vizi Beam Hybrid 2R User Instructions

Also see for Vizi Beam Hybrid 2R: User manual

Contents

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 24Vizi Beam Hybrid 2R System Menupress ENTER.2. Press the UP or DOWN buttons until “Automatic On” is displayed,press ENTER.3. Either “Off” or “On” will be displayed, use the UP and DOWN but-tons to toggle between.4. Press ENTER to confirm your selection or press MODE/ESC toexit.Lamp on via external controller - With this function you can selectif you want to switch the lamp on via an external controller. This isused in conjuction with Internal Programs DMX channel, DMX values40-59.1. Press the MODE/ESC button to access the main menu. Press theUP or DOWN buttons so that “Lamp Control” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Lamp On Via DMX” is dis-played, press ENTER.3. Either “Off” or “On” will be displayed, use the UP and DOWN but-tons to toggle between. Select “On” if you wish to activate this func-tion, or “Off” to deactivate.4. Press ENTER to confirm your selection or press MODE/ESC toexit.Lamp off via external controller - With this function you can selectif you want to switch the lamp off via an external controller. This isused in conjuction with Internal Programs DMX channel, DMX values60-79.1. Press the MODE/ESC button to access the main menu. Press theUP or DOWN buttons so that “Lamp Control” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Lamp Off Via DMX” is dis-played, press ENTER.3. Either “Off” or “On” will be displayed, use the UP and DOWN but-ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 35Vizi Beam Hybrid 2R System Menu2. Press the UP or DOWN buttons until “Reset Others” is displayed,press ENTER.3. Press ENTER to confirm your selection or press MODE/ESC toexit.EFFECT ADJUSTTest Channel - With this function you can test/correct each channelfunction.1. Press the MODE/ESC button to access the main menu. Press theUP or DOWN buttons so that “Effect Adjust” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Test Channel” is displayed,press ENTER.3. Use the UP or DOWN buttons to scroll through the various chan-nels.4. Press ENTER or press MODE/ESC to exit.Manual Control - With this function you can easily adjust the lamp.All effects will be canceled, the shutter will open and output intensitywill be 100%. With the individual functions you can focus the light onflat surface (a wall) and finely adjust the lamp.1. Press the MODE/ESC button to access the main menu. Press theUP or DOWN buttons so that “Effect Adjust” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Manual Control” is dis-played, press ENTER.3. Use the UP or DOWN buttons to scroll through the various func-tions. Press ENTER when you find the function you would like toadjust.4. Press ENTER or press MODE/ESC to exit.Calibration - With this function you can calibrate and adjust the